SmartZone Gateway EP042 User Manual
-
25
-
Initial Network Setup
This section provides details on preparing the unit for network access and allowing
SNMP network management.
Connection to the Web Management Interface is required.
Entering NMS Details
1. Click the
Setup
tab on the top menu bar then select the
SNMP NMS
link on the left
menu bar.
2. Enter the IP address, chosen community string, and required NMS access per-
missions of the Network Management Stations to be used.
3. Click
Save
to confirm the changes.
4. To disable an NMS, select the
Disabled
option from the
NMS Access
drop-down
list.
Entering Trap Receiver Details
1. Click the
Setup
tab on the top menu bar.
2. Select the
SNMP Rec’rs
link on the left menu bar.
