SmartZone Gateway EP042 User Manual
-
47
-
Input Sensors - Configure
You can configure the individual sensor channels in this window.
Select the
Config
option to open a detailed configuration page for the selected sensor.
The difference between the menus presented here and the menus presented on the
Defaults page is that settings are applied to individual channels.
The submenus contain all the options in the Defaults menu, plus two additional options:
Name
Sensor channels can be assigned names for ease of identification (for example, “Server
Room Sensor” or “UPS Battery Fail”).
Type
The type of connected sensor is specified here. The sensor channels can be set to auto
detect, temperature, humidity, contact, or disabled.
Note
: Occasionally, clear traps will be sent to the NMS trap receivers while a sensor is
being connected to a device. This is considered normal behavior, because some voltage