SMARTZONE G6 UPS USER MANUAL
16
U06N12V / U06S12V
The 6kVA EU UPS unit has a terminal block for a hardwire connection on the input of
the UPS. This unit has three groups of outputs. Group 1 (hardwire connection) is the
main non-switchable output; this output should contain the critical loads. Group 2 (2x C-
13 with a 10A output breaker) are non-critical load switchable outlets. Group 3 (2x C-19
with a 16A output breaker) are non-critical load switchable outlets. During battery
backup mode the Group 2 and Group 3 outlets may be turned off earlier to conserve
battery capacity for the Group 1 output.
Figure 8: European 6-10kVA Rear View (U06N12V / U06S12V)
U10N11V / U10S11V
The 10kVA NA UPS unit has a terminal block for a hardwire connection on the input of
the UPS. This unit has two groups of outputs. Group 1 (hardwire connection) is the main
non-switchable output; this output should contain the critical loads. Group 2 (2x L6-30R)
are non-critical load switchable outlets. During battery backup mode these outlets may
be turned off earlier to conserve battery capacity for the Group 1 output.
Figure 9: North American 10kVA Review View (U10N11V / U10S11V)
