34
Appendix A – Industrial Gateway
Status LED Definitions
This appendix provides descriptions and the LED location for the Industrial
Gateway LED(s).
SynapSense
®
2.4GHz Industrial Gateway LEDs
The Industrial Gateway communicates its current status via LEDs (Light Emitting Diodes);
the optical windows for the LEDs are located on the top lid of the Gateway as shown
below.
Table7 shows the LED Status color definitions after the Industrial Gateway has booted and
has reached its steady state operating condition. (<60 seconds).
Table 7 – Industrial Gateway LED Definitions
Eth. Indicator
Status
Description
Status
Green
Industrial WSN Gateway is functioning normally.
Red
Industrial WSN Gateway has experienced a fault.
LED Off
All Power is off to Gateway
Data Link,
LED Off
No Ethernet link on specific port. Port
administratively disabled or cable disconnected.
Summary of Contents for SynapSense 1167
