TDP43ME
TDP43ME: PA26305A01_05
Page: 31 of 59
12-2011
In the PROPERTIES window, click
on PRINT TEST PAGE.
The printer will print the test page.
The printer was previously set to
switch Ethernet port to active at the
end of the next print command sent.
After the test page is printed, the
relay within the printer will switch to
activate the ETHERNET port.
[A
slight audible click may be heard
when the relay switches from one
port to the other port.]
If the printer
red-lights, that is ok, simply turn off
the printer and then turn it back on.
Step 1.H
