©
Panduit Corp. 201
4
OPERATION MANUAL
UPS003024024015
Page: 13 of 29
2.2.11. RESET
The UPS can be reset by using a standard #1 sized paper clip to depress the recessed Reset
Button accessible from the bottom of the unit.
With the power
“
ON
”
, depress and hold the
Reset Button. Release the button after the LEDs turn
“
OFF
”
and the LED initialization
sequence begins.
Figure 3: Reset Button Location
2.2.12. RESTORE FACTORY DEFAULTS
The user settable parameters can be restored to factory default values by using a standard #1
sized paper clip to depress and hold the recessed reset button accessible from the bottom of
the unit. Turn unit off. Depress the button and hold while switching the power on. Release the
button after the LED turns off and the LED initialization sequence starts. A list of the
parameters and their factory default values are listed below.
Item
Description
Default Values
4.2.1.9 Charge Speed
Slow
Device Name
Panduit UPS
Network Settings DHCP
Password
Serial number
Username
Panduit UPS
Language
English