Suzhou Pangolin Robot.Corp.,Ltd
30
Chapter 11 Common Faults & Solutions
Serial
number
Failure phenomenon
Possible reasons for failure
Solution
1
The robot cannot be turned on
Robot battery is too low
Charge the robot (more than half an hour) and restart
2
The robot cannot access the
Internet, or cannot search for
wireless networks
Desktop settings, wireless network is turned
on, router ip configuration is changed
Turn off the wireless network set on the desktop, reset
the router, and reconfigure
3
Robot does not go fault
Emergency stop button is triggered
Check the emergency stop button behind you, turn it
to the right to release the emergency stop
4
The robot occasionally fails to
recharge
The map is too large or the starting point is
not suitable
Change the starting position of the map to reduce the
use area of the robot
5
The bottom layer of the robot is not
connected
There is no communication on the router,
and the motherboard does not start
Shut down and restart the robot, wait about 3
minutes
,
6
The robot failed to restore the map
The bottom layer is not connected, save the
map failed
Turn on the machine and wait for about 3 minutes to
restore the map
For more information, please refer to the company website http://www.csjbot.com