BA_PH_690-200_EN_11-22.docx
36
10.3
Mounting the Cross Slide
Figure 21: Cross slide mounting
Figure 22: Cross slide clamping
•
Pull the slide table into the rearmost position and bring the swivel arm (
6
) into position.
•
Lift the cross slide (
22
) with 2 persons and place it on the support (
A
) for the cross slide.
•
Loosen the clamping rail (
X
) - in Figure concealed under the hook-in bar (
25
) - by means
of the clamping lever (
24
).
•
Insert the clamping rail (
X
) into the cross slide guide (
26
) on the slide table.
•
Fix the cross slide (
22
) by means of the clamping lever (
24
).
Warning! Danger of crushing when mounting the cross slide (clamping rail / cross slide).
10.3.1
Moving the Cross Slide
Figure 23: Moving the cross slide
The procedure for moving the cross slide (
22
)
is as follows:
•
Loosen the clamping lever (
24
).
•
Move the cross slide (
22
) to the
desired position.
•
Fix the clamping lever (
24
).
22
7
6
24
X
26
25
22
24
