BA_PH_690-200_EN_11-22.docx
80
Article
Description
Art. No.
DOUBLE-SIDED
MITRE FENCE DSG A
For angle cuts 0° - 90° on the double slide table, length and angle
measurement adjustable via scale; for cutting lengths up to 1375 mm,
with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°,
45°, 60°, 67.5°, incl. splinter block, wall bracket and an additional factor
scale for easy calculation of wrong mitres for different workpiece
widths.
4379
DOUBLE-SIDED
MITRE FENCE DSG D
For angle cuts 0° - 90° on the double slide table, length measurement
adjustable via scale, angle measure digitally adjustable; for cutting
lengths up to 1375 mm, with length compensation for preferred angles
5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splinter block, wall bracket
and an additional factor scale for easy calculation of wrong mitres for
different workpiece widths.
4380
23.3
Slide Table and additional Supports
Article
Description
Art. No.
REMOTE LOCKING OF
THE SLIDE TABLE
For blocking the top slide table at a grid spacing of 70 mm.
4483.1
CUTTING LENGTH OF
SLIDE TABLE 2000 MM
Instead of the 3200 mm standard cutting length.
4584
CUTTING LENGTH OF
SLIDE TABLE 2600 MM
Instead of the 3200 mm standard cutting length.
4586
CUTTING LENGTH OF
SLIDE TABLE 3800 MM
Instead of the 3200 mm standard cutting length.
4405
23.4
Support Systems
Article
Description
Art. No.
ADDITIONAL SUPPORT
FOR LARGE PLATES
Can be hooked on the slide table, length 500 mm
.
4321
SWIVEL TABLE SUPPORT
WITH PLASTIC ROLLER
Adjustable as table extension in the infeed or outfeed area, attached
to the aluminium double slide table
.
4768
SWIVEL-AWAY DEVICE
FOR THE CROSS SLIDE
Quick ergonomic sliding into the parking position
.
4770
ADDITIONAL
CORNER TABLE
750 X 940
mm for optional cutting width of 1250
mm; as additional
table support next to the standard table extension.
4775
EXTENDABLE SUPPORT
ROLLER ON CROSS SLIDE
Extension length 610 mm.
4499
