BA_PH_690-200_EN_11-22.docx
14
4
Safety
4.1
Basic Safety Instructions
Woodworking machines can be dangerous if used improperly. Therefore, observe the safety instructions listed
in this chapter and the accident prevention regulations of your employer's liability insurance association!
The manufacturer accepts no liability for damage and malfunctions resulting from failure
to observe these operating instructions.
4.1.1
Application Area and Intended Use
The PANHANS 690|200 sliding table saw is used exclusively for cutting materials for which
the saw blade used is suitable (e.g. wood, chipboard, veneer, plastic and aluminium).
This sliding table saw is not suitable for cutting metal, plastic or scrap wood (which may
contain nails, screws etc.).
The machine may only be operated on a firm, level surface with a minimum load-bearing
capacity of 1,000 kg/m².
Any processing of other materials requires prior consultation with and approval of the manufacturer.
Only one-piece (CV) or compound (HM) circular saw blades (according to EN 847-1) with the following dimen-
sions are permissible as tools:
Saw blade
min.
max.
Main saw blade
Ø 250 mm
Ø 450 mm
Scoring saw blade
-
Ø 125 mm
Minimum saw blade thickness:
Main saw blade:
2.2 mm
Scoring saw blade: 3.6 mm
The machine is not suitable for operation outdoors or in potentially explosive areas.
•
Permissible ambient temperature: +5 … +40° C.
•
Permissible humidity: 30 … 90 %.
Intended use also includes the connection of the machine to an adequately dimensioned extraction system and
compliance with the operating, maintenance and servicing conditions specified in the operating manual.
Any other use is not in accordance with the intended use and is therefore prohibited.
4.1.2
Modifications and Conversions to the Machine
Unauthorised conversions and modifications to the machine are strictly prohibited for safety
reasons. This will invalidate the CE declaration of conformity! The manufacturer is not liable
for any resulting damage. The risk for this is borne exclusively by the operator/user.