Page 37
OPERATOR MANUAL
Maintenance
2. To remove the U-track, pull back on lever (A) away from unit (Fig.39).
The Fig.40 shows how to pull the lever and remove the U-track.
3. Inspect and clean the entire track area from beginning to end.
4. Remove staples, paper clips, rubber bands, and pieces of paper that may have accumulated during use.
5. Using a container of canned air and nozzle, spray the track area and check entrance.
Fig.39
Fig.40
A
Panini My VisionX_07.06 6-10-2006 10:21 Pagina 37