PANSAR SWEDEN AB
mässvägen, 125 30 Älvsjö, Sweden
Movement Instructions Manual
How to use stopwatch functions:
T
he stopwatch can measure up to 11:59' 59" 95 in 1/20 second increments.
When the measurement reaches 12 hours, the stopwatch automatically stops counting.
• 1/20 second hand is capable of timing 12 minutes. (1 second x 43,200 times)
• Second hand is capable of timing 12 hours. (60 seconds x 720 times)
Movement of stopwatch 1/20 second hand
• After the stopwatch is started, stopwatch 1/20 second hand moves for about 10 minutes and automati
-
cally stops at the "0" position.
• When the measurement is stopped or split time is measured, it moves to indicate the elapsed 1/20
seconds.
• After the stopwatch is restarted or split time is released, stopwatch 1/20 second hand moves for about
10 minutes and stops automatically.
• In the same manner, if the stopwatch is stopped and restarted repeatedly or split time is measured and
released repeatedly, stopwatch 1/20 second hand moves for about 10 minutes and stops automatically.
Note: If the stopwatch hands do not return to the "0" position when the stopwatch is reset to "0", follow the procedure in
"How to adjust the stopwatch”
.
Stop
Reset
Start
Stop
Reset
Stop
Reset
Start
Split
Split
Release
Stop
Reset
Start
Start
Finish time
of 1st
competitor
2nd
competitor
finishes
Stop
Reset
Standard measurement
Accumulated elapsed time measurement
Split time measurement
Measurement of two competitors
3/4
