SIM card and battery
About your SIM card
When you subscribe to your network operator, you receive a SIM
(Subscriber Identity Module) card containing your registration information,
PIN code, etc.
Like a credit card, it should be kept secure and handled carefully. Do not
bend, scratch or expose it to moisture. Avoid static electricity.
To avoid corrupting your SIM card’s memory, always switch off your phone
before removing or inserting your SIM card
About your battery
Your phone uses a Li-Ion battery. Make sure to use an authorized battery
and charger only. For more details, please inquire at your nearest dealer.
NOTE
: Your phone is powered by a Lithium Ion (Li-Ion) battery. This means
that, unlike other forms of battery technology, you can recharge your
battery while some charge remains without reducing your phone’s
autonomy due to the “battery memory effect” inherent in those technologies.
Installing/removing SIM card and battery
1. Remove the battery cover from the unit. To fit the battery cover, put it
on the guide rail and push up.
2. Insert the SIM card into the slot. The gold contacts of the SIM card
should go against the metal contacts of the phone.
Put the contacts of the battery into the hole located at
the bottom of the unit insert and press the upper side
of the battery until you hear the “click”.
3. To remove the battery push the bottom of the battery
to upwards(1) and remove(2) the battery.. Push the
SIM card in the arrow direction as shown.
To charge your battery
1. To charge, open the protective cover on the top right side
and connect the charger adapter.
2. To remove the adapter connection press the adapter’s
side buttons(1) and pulling the adapter away(2).
2
1
1
1
1
2
2
