36
36
01
03
04
05
06
07
02
37
If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the first to hang up, all three calls will
be disconnected.
CALL WAITING FUNCTION
If you are on a call and you receive another incoming call, you will hear a beep and the
caller’s phone number will appear on the display. With Call Waiting, you may put the
active call on hold while you answer the other incoming call.
1. To answer another call while on the phone, press the SEND Key .
This places the first call on hold. To switch back to the first caller, press the SEND
Key again.
CALLING A NUMBER FROM CONTACTS
1. From idle mode, press the Key twice to unlock the keypad, then press the
Right Soft Key
[
Contacts
].
2. Select the Contact entry and press the Key [
VIEW
], then select the desired
phone number.
3. Press the SEND Key to place the call.
Selecting the Contact entry and then pressing the Send Key will dial the Default
Number of the Contact entry automatically.
ADJUSTING VOLUME
TO ADJUST THE MASTER VOLUME:
1. From idle mode, press the Key twice to unlock the keypad, then press the
Volume Keys
/
up or down.
2. Select one of the following options and press the Key [
SET
] to save it.
• All Sounds Off
• Alarm Only
• Vibrate Only
• Low
/
Medium Low
/
Medium
/
Medium High
/
High
Press the Volume Keys
/
up or down to adjust Earpiece volume during a call.
CALLER ID FUNCTION
Caller ID displays the number of the person calling when your phone rings. If the caller’s
identity is stored in Contacts, the name appears on the screen. The caller ID is stored in
the Recent Calls menu.
VIBRATE MODE
Vibrate Mode mutes key tones and alerts for an incoming call or message. To activate
Vibrate Mode:
1. Slide the phone up, then press and hold the Vibration Mode Key
to
activate vibration mode.
2. To deactivate vibration mode, press and hold the Vibration Mode Key
.
SPEAKERPHONE MODE
The Speakerphone feature lets you hear audio through the speaker and talk without
holding the phone.
1. To activate, press the Key twice to unlock the keypad, then press the
Speakerphone Key
. To deactivate, press the Speakerphone Key
again.
USING AUTO KEYPAD LOCK FUNCTION
When the slide is closed the Side Keys and the Directional Key are locked. To unlock
them, press any key on the external display with the phone in the closed position
“
Press OK to Unlock
” displays. Press the Key to unlock the keypad.
Summary of Contents for Verizon Jest 2
Page 2: ...UserGuide...
Page 87: ...Gu adelUsuario...
