17
3. Replace the battery door, and fold out the desk stand and place the console in the upright
position.
Note:
The batteries are intended for back-up power only. The backlight will remain on for 5 seconds
when on back up battery power only. Only when you use power adapter it will the back-light be
continuously on.
4. After initialization, the console will instantly display indoor temperature, humidity, barometer,
tendency, date and time. The wind speed, wind direction, rain, and outdoor temperature
and humidity will update on the display within a few minutes. The remote search icon will turn
on
：
Do not touch any buttons
until the remote sensor reports in, otherwise the remote sensor search mode
will be terminated and the search icon will turn off. When the remote sensor data has been received, the
console will automatically switch to the normal mode, and all further settings can be performed.
If it does not update, please reference the troubleshooting guide in Section
错误！未找到引用源。
.
6.3 Key function
The console has eight keys for easy operation
Key
Description
SET
Hold this key to enter setting mode
TEMP.
Press this key to view wind Chill, Heat Index, Dew Point
Temperature
Press the TEMP key 5s, will register new transmitter.
RAIN
Press this key to view Rain Rate, event, Rain Day, Rain Week, Rain
Month, and Rain total*
Press the RAIN key 2s to reset current display rain*
WIND/ +
Press this key to view wind/gust and wind direction
In Setting mode, pressing
WIND/+
key select the unit or scrolls
the value; keeping press and holding
WIND/+
key for 2 second
will increase/decrease digits in great steps.
