Planetary Mixer Collection Operating Manual – PM10, PM20, PM30
Tel: 0800 0461570
Fax: 0800 0461571
Web: www.pantheonce.co.uk
Email: Info@pantheonce.co.uk
Pantheon Catering Equipment
Vulcan Works, Dixon Street,
Bolton, BL6 7PH
Installation
General
The installation of the unit must only be performed by a qualified technician.
Confirm that the device is positioned on a solid, even, safe and stable surface that tolerates
the weight of the unit.
Ensure no flammable products are placed near the unit.
Position the device appropriately so that the plug is always accessible.
Check the unit isn’t placed close to any water.
Establish that there is sufficient operating space around the machine.
Please Note: The Information in this section applies for all of the devices in the manual
Operating Instructions
Be sure to follow the instructions below and use ‘figure 1’ to correctly operate the planetary mixer:
Slide the guard across and pour the ingredients into the bowl
Close the guard and confirm the speed setting is set to the lowest speed to begin with.
Switch on the mixer using the green start button
It is advised to start the mixer at the lowest speed and if required work up to the quickest
speed.
Do not change the gear whilst the mixer is running. Always stop the mixer to select gears,
and then press “start”.
If the machine is stopped during the mixing process, be sure to return to the lowest speed
before starting the machine up again.
After use, press the stop button and ensure the mixer has completely stopped before
opening the guard
1.
Gear Change Hand Lever
2.
Stirring Shaft
3.
Mixer
4.
Stainless Bowl
5.
Power Switch
6.
Bowl Lift Lever
7.
Safety Guard
8.
Support
“Figure 1”
Please Note: The Information in this section applies for all of the devices in the manual
2
