PANTUM MALAYSIA SDN BHD
Page 7
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Smart Thermal Detector Software Setting
Connect USB Mouse to the Smart Thermal Scanner for detail settings of the software.
Consult your IT Administrator before the setting.
Click the setting icon by moving the mouse cursor with your
connected mouse
Configuration page will be shown immediately.
Basic Setting
1. Capture photo when body temperature detected exceed
37.3˚C / 99.1˚F
• By Enabling this function, photo will be captured when
abnormal body temperature is detected (ie: Yellow and
Red).
2. Capture photo when body temperature detected
successfully
• By Enabling this function, photo will be captured after the
detection no matter what the result is detected.
3. Enable smart camera detection
• By Enabling this function, temperature screening will only
be started when human face is detected.
4. Enable measuring over 35cm distance
• By Enabling this function, measurement will be started
even detected distance is over 35 cm.
5. Display in ˚F (Degree Fahrenheit)
• Change display of ˚C into ˚F
Advanced Setting
It is not necessary to set the advanced configuration in normal
usage. Please contact your local supplier before making any of
the advanced setting.
1. Kiosk – Machine ID
• Enter the Machine ID provided by your local supplier.
Make sure the machine is connected to the internet
before activating.
2. Cloud Server Address
• Enter the CMS web address in order to connect to the
cloud platform. This value is usually pre-configured and
not necessary to configure.
