and open the cover.
Wait until the printer head cools down. The
printer head can be very hot after printing.
Completely clean printer head using an alcohol
swap (not water).
Wait until the alcohol has completely
vaporized, then close the cover.
10
Printer Head Cleaning Steps:
1.
2.
3.
4.
5.
NOTICE
maintenance.
Do not touch or scratch the printer head surface,
roller, or sensors.
Avoid gas, acetone, or other organic solvents.
MAINTENANCE
Check if it is clean: connect the power cord > turn
on the printer > press and hold the circle feeder
button until you hear two short beeps > print the
self-test page
Turn the printer off, remove the power cord,
Ensure power is off when performing
