Press the circle feeder button on the printer to
skip a blank label.
To run a self-test, press and hold the feeder
button until you hear two short beeps.
Avoid poor quality labels as they can damage
the printer.
Regularly clean the printer head.
If paper is jammed, turn off the printer, and
allow the printer head to cool down. Open the
cover and ensure that the rubber is clean. If
dirty, use alcohol to clean. Allow the area to
Insert this label printer into the same USB port
on your computer every time. This will avoid
creating duplicate copies of the printer in
your operating system.
11
PRO TIPS
dry off before turning the printer on.
Anytime you change your label, run the
automatic label identification.
