background image

21

20

REPLACING THE BATTERY

WARNING!

This Uninterruptible Power Supply contains potentially haz-
ardous voltages.  Do not attempt to disassemble the UPS be-
yond the battery replacement procedure.  This UPS contains
no user serviceable parts.  Repairs and Battery replacement
must be performed by

 QUALIFIED SERVICE PERSONNEL

ONLY.

Do not open or mutilate batteries.  Released electrolyte is harmful
to the skin and eyes and may be toxic.

CAUTIONS:

(QUALIFIED

 

SERVICE PERSONNEL ONLY)

Do not dispose of batteries in a fire.  The batteries may ex-
plode.  The batteries in this UPS are recyclable.  Dispose of
the batteries properly.  The batteries contain lead and pose a
hazard to the environment and human health if not disposed of
properly.  Refer to local codes for proper disposal requirements
or return the battery to the supplier.

The battery system can present a risk of electrical shock.  These batteries
produce sufficient current to burn wire or tools very rapidly, producing molten
metal.  Observe these precautions when replacing the batteries:
1.  Remove watches, rings, or other metal objects.
2.  Use hand tools with insulated handles.
3.  Wear protective eye gear (goggles), rubber gloves and boots.
4.  Do not lay tools or other metal parts on top of batteries.
5.  Disconnect the charging source prior to connecting or disconnecting the
     battery terminals.
6.  Determine if the battery is inadvertently grounded. If the battery is, remove
     the source of the grounding. Contact with any part of a grounded battery
     can result in an electrical shock. The likelihood of such shock will be re-
     duced if such grounds are removed during installation and maintenance.

This UPS has an easy to replace hot-swappable batteries.  Please read all of
the 

WARNINGS

 and 

CAUTIONS

 before attempting to service the batteries.

Typical battery life is 3 to 5 years.  Environmental factors do affect battery life.
High temperatures, poor utility power, and frequent, short duration discharges
have a negative impact on battery life.

  NOTE:  

If there is a power interruption

while replacing the hot-swappable batteries, with the UPS on, the load will not
be backed up.

BATTERY REPLACEMENT PROCEDURE

PLEASE READ THE CAUTIONS AND WARNINGS BEFORE ATTEMPTING
TO REPLACE THE BATTERY MODULE

Hot-swappable batteries mean that the battery modules can be replaced with-
out powering down the whole UPS system.

NOTE:  

If there is a power interruption while replacing the hot-swappable bat-

tery module, with the UPS on, the load will not be backed up.  To hot-swap the
battery module start with step number 6.
1.  Turn off the equipment that is plugged into the output receptacles of the
     UPS.
2.  Press and release the On/Off/Test button on the front panel to turn the UPS
    OFF.
3.  Unplug the UPS's AC power cord from the AC wall outlet.
4.  Unplug the equipment from the output receptacles of the UPS.
5.  Unplug the computer interface cable from the rear panel of the UPS.
6.  Remove the front panel retaining screws. (FIG. 2)
7.  Lay the front panel on top of the UPS.
8.  Remove the two retaining screws for the battery retaining bracket. (FIG. 3)
9.  Remove the battery retaining bracket. (FIG. 3)
10.  Disconnect the Battery connectors (red and black). (FIG. 4)
11.  Grasp the battery pull tab and gently pull the battery module out of the UPS
       and set on the floor. (FIG. 4)

NOTE:  

Use Caution, the battery module is heavy.

12.  Slide the new battery module into the UPS.
13.  Verify proper polarity.  Reconnect the battery connectors (red and black).

NOTE:  

Some sparking may occur this is normal.

14.  Re-install the battery retaining bracket.
15.  Re-install the two retaining screws for the battery retaining bracket.
16.  Re-install the front panel on the UPS.
17.  Re-install the front panel retaining screws.

E750RT2U
E1000RT2U

E2000RT2U

Internal
Battery
Module
Part #

BM0029

BM0031

E3000RT2U

BM0032

Model #

Replace batteries with the same number and type as originally
installed in the UPS.  These batteries have pressure operated vents.
These UPSs contain sealed non-spillable maintenance-free lead
acid batteries.

CAUTION:

E1500RT2U

BM0030

Summary of Contents for E750RT2U

















Reviews: