11
10
CONNECTING THE BATTERIES
(QUALIFIED
SERVICE PERSONNEL ONLY)
Please read all of the
WARNINGS
and
CAUTIONS
before attempting to con-
nect the batteries.
1. Remove the front panel retaining screws.
2. Lay the front panel on top of the UPS.
3. Verify proper polarity. Connect the battery connectors (red and black)
together.
NOTE:
Some sparking may occur this is normal.
4. Re-install the front panel onto the UPS.
5. Re-install the front panel retaining screws.
6. Connecting the Batteries is complete. See Connecting your Equipment.
RACKMOUNT CONFIGURATION
This UPS comes with mounting brackets for the standard 19" (46.5cm) rack
installed on the UPS. The mounting brackets to fit a 23" (59.2cm) rack and
Rail Kits for 4-post racks and cabinets are also available. The screws for
mounting the UPS to the rack are included.
CAUTION!
DO NOT USE THE MOUNTING BRACKETS TO
LIFT THE UPS.
The mounting brackets are
ONLY
for securing the
UPS to the rack.
NOTE:
The mounting brackets can be mounted in the middle of the UPS.
1. Remove the UPS from the shipping box.
2. Mount the UPS into the rack and secure with the retaining screws.
WARN-
ING:
Use two or more people when installing the UPS. Use
CAUTION
, the
UPS is extremely heavy. Do not move the rack after the units have been in-
stalled. The rack may become unstable due to the weight distribution.
3. The Rackmount Configuration is complete. See Connecting the Batteries.