Para systems ED1000RM2U, User Manual

2

3

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS !

WARNING:

  Risk of Electrical Shock.  Hazardous live parts inside

these power supplies are energized from the battery even when the
AC input is disconnected.

CAUTION!  

To de-energize the outputs of the UPS:

1.

If the UPS is on press and release the Off button.  NOTE:  For the
208V models; turn the input circuit breaker to the off position.

2.

Disconnect the UPS from the AC wall outlet.

3.

To de-energize the UPS completely, disconnect the battery.

CAUTION!

  To reduce the risk of electrical shock in conditions

where the load equipment grounding cannot be verified, disconnect
the UPS from the AC wall outlet before installing a computer interface
cable.  Reconnect the power cord only after all signaling connections
are made.

CAUTION!  

Connect the UPS to a two pole, three wire grounding

AC wall outlet.  The receptacle must be connected to the appropriate
branch protection (circuit breaker or fuse).  Connection to any other
type of receptacle may result in a shock hazard and violate local
electrical codes.  Do not use extension cords, adapter plugs, or surge
strips.

English

English

Thank you for purchasing this power protection product.  It has been designed
and manufactured to provide many years of trouble free service.

Please read this manual before installing your Endeavor  On-Line Series UPS,
models  ED1000RM2U, ED1000RMT2U, ED1500RM2U, ED1500RMT2U,
ED2000RM2U, ED2000RMT2U, ED3000RM2U, ED3000RMT2U as it provides
important information that should be followed during installation and mainte-
nance of the UPS and batteries allowing you to correctly set up your system for
the maximum safety and performance.  Included is information on customer
support and factory service if it is required.  If you experience a problem with the
UPS please refer to the Troubleshooting guide in this manual to correct the
problem or collect enough information so that the Technical Support Depart-
ment can rapidly assist you.

CAUTION!  

To reduce the risk of electrical shock with the installa-

tion of this UPS equipment and the connected equipment, the user
must ensure that the combined sum of the AC leakage current does
not exceed 3.5mA.

This symbol indicates "ATTENTION"

This symbol indicates "Risk of Electrical Shock"

This symbol indicates "Alternating Current Supply"

This symbol indicates "Direct Current Supply"

This symbol indicates "Alternating Current Supply Phase"

This symbol indicates "Equipment Grounding Conductor"

WARNING:

This Uninterruptible Power Supply contains potentially

hazardous voltages.  Do not attempt to disassemble the UPS beyond
the battery replacement procedure.  This UPS contains no user ser-
viceable parts.  Repairs and Battery replacement must be performed
by QUALIFIED SERVICE PERSONNEL ONLY.