ParaBody 216 Assembly Instructions Download

Page: 5 / 5

•

TIGHTEN cable jam nut securely!

FIGURE 6

STEP 6:

WEIGHT

STACK PIN

WEIGHT STACK

CABLE

20 HOLE WEIGHT

STACK SHAFT

• Assemble the WEIGHT STACK PIN to the

20 HOLE WEIGHT STACK SHAFT as
shown.

• Screw the WEIGHT STACK CABLE into

the 20 HOLE WEIGHT STACK SHAFT of
the HEAD PLATE until the CABLE slightly
pulls on the HEAD PLATE.

Thank you for purchasing the Parabody 216101 50 LB. ADD-ON KIT. If unsure of proper use of equipment, call your local

LifeFitness distributor or call the Parabody customer service department at (800) 328-9714.

•

CAREFULLY

assemble and

SECURELY

tighten

any previosly removed or loos-

ened bolts in the TOP BOOM to allow the
GUIDE RODS to be secured. Refer to the
GYM ASSEMBLY INSTRUCTIONS .

Summary of Contents for 216

Page 1: ...1 216 50 LB ADD ON KIT ASSEMBLY INSTRUCTIONS WARNING Read and follow all directions for each step to insure proper asembly of this product CLASS H PART 7016801 REV B Revision 03 23 01 Version 216101 ...

Page 2: ...KEY 3 4 PART 6978101 6382301 DESCRIPTION WEIGHTSTACK LABEL WEIGHTPLATEBUSHINGS 10CT QTY 1 1 DESCRIPTION WEIGHTPLATE WEIGHTSTACK SHAFT FIGURE 1 Insert two WEIGHT PLATE BUSHINGS 4 into each of the five WEIGHT PLATES 1 as shown in FIGURE 1 STEP 1 4 1 2 ...