10
5.1 Surround Configuration
Direct Radiating Surrounds
Position speaker on each side of the listening area as shown in Fig. 4a.
ADP
™
Surrounds
Side-Wall Placement
: Position speakers on each side of listening area, as shown in Fig. 4b.
Corner Placement
:
Alternatively, position speakers in each of the adjacent back corners as shown
in Fig. 4c. They can also be moved out from the back corners (maintaining the same angle position)
and placed as close as 3 ft (1 m) from the main listening area.
6.1 Surround Configuration
(optional extra, see Dealer)
ADP
™
Rear
With its large, reverberant soundfield, an ADP
™
speaker is also the best choice for the rear
channel in a 6.1 surround-sound system. Place one ADP
™
in the center behind the listening area
(Fig. 4d), with drivers firing towards the side walls (nameplate “points” toward listening area).
7.1 Surround Configuration
(optional extra, see Dealer)
Direct-Radiating Rears
Position behind the listening area—one speaker slightly right and other slightly left, as shown in Fig. 4e.
Keep direct-radiating speakers well back from the listening area for better surround performance.
ADP
™
Rears
Position behind the listening area—one speaker slightly right and the other slightly left, as shown in Fig. 4e.
Drivers should be firing toward the side walls and each other to ensure a large, reverberant soundfield
(nameplate “points” toward listening area).
