7
IMPORTANT! While it is possible to use a manual screwdriver for installation, we
strongly suggest using a power drill. To avoid damaging or breaking the clamps, set
your drill to a LOW setting. A high power setting is NOT necessary and may cause
clamps to crack or break from the added force. Such damage is NOT covered under
warranty.
1) Remove the magnetically attached baffle from the subwoofer assembly (Fig. 4a).
2) Set your Power Drill to the Low setting.
3) Gently position the assembly into the wall cavity (Fig. 4b).
4. Supporting the assembly with one hand, tighten each screw (Fig. 4c). Stop tightening
when you sense resistance.
5. Gently press the baffle onto the front face of the speaker (Fig. 4d). The magnets will
ensure correct attachment.
Fig. 4b
Fig. 4c
SUBWOOFER INSTALLATION
Fig. 4d
Fig. 4a
Summary of Contents for DCS-208FR3
Page 1: ...Owner s Manual ...
Page 11: ...NOTES ...
