Bluetooth Connection
Bluetooth Function
****Please be noted****
(1). Apple devices are shown as monitor and do not have the ability nor the
capability to control your treadmill. All the operation keys will be on the console
of the treadmill.
(2). One treadmill can only connect with one Apple device.
Steps:
1.
Please download “
PAFERS Tread Monitor
” from Apple Store before using your
Apple device to connect with treadmill.
Noted: Pafers provides both iPhone and iPad Bluetooth apps, please make sure
you download the correct version of device app for your Apple device.
2.
Once you downloaded the application, for the first time paring, please go to setting
and connect manually (SETTING
GENERAL) and turn on Bluetooth. Searching
for the preset Bluetooth Treadmill name, for instance: Paradigm – Pacer 2800”.
3.
Once your Apple device is connected with the treadmill, now you can begin to start
the program. Tap on “
PAFERS Tread Monitor
” to begin.
4.
After you heard the “BEEP” sound and the treadmill console will be switch off the
light to your Apple device. From your Apple device, the darken part becomes
colorful (shown as below pictures), which means they (the Apple device and the
treadmill) are connected.
5.
After you chose your desired exercising program, your Apple device will ask you to
press “START” key on the console to start the treadmill.
(you can press “START” right after you heard the “BEEP” sound)
6.
Press the “STOP” key to pause the treadmill, if you want to continue your program
please press “START” to remain. After remaining the program, the treadmill will
countdown 3 seconds then starts the treadmill.
7.
When press the “START”/”STOP” more than 3 seconds, your Apple device will exit
the program.
Call for service 07 3272 7010
20
