Page 2 of 28
Part No. 100318 Rev. 1
Issued: 2021-06-08
CONTENTS
Specifications ................................................. 2
Safety Information ....................................... 3
Liability Disclaimer ....................................... 4
Component Overview ................................ 5
Assembly Instructions ................................ 6
Installation ...................................................... 22
Remote Control & Controller .................... 23
Maintenance .................................................. 24
Warranty .......................................................... 26
SPECIFICATIONS
Models and specifications for Paradise hydraulic boatlifts covered in this manual are provided
in the table below:
*Custom bunk lengths and configurations are available
**Solar, and Lithium options available
Congratulations on acquiring your new
Paradise hydraulic boatlift system!
These lifts are built with the highest
quality 6061-T6 marine grade aluminum
and stainless steel hardware. All non-
adjustable components are welded to ensure
ease of installation. The stainless steel
cylinder and patented “retracted when up”
configuration ensures the maximum cylinder
life by preventing rod pitting/corrosion and
increasing seal life.
Our hydraulic fluid is non-toxic and
biodegradable so you do not need to worry
about environmental harm. We hope you
enjoy your Paradise Hydraulic Boatlift!
Model
Factory Specifications
PH-6K-5
PH-6K-6
PH-8K-4
PH-8K-5
Rated Capacity
6000 lbs (2722 kg)
6000 lbs (2722 kg)
8000 lbs (3629 kg)
8000 lbs (3629 kg)
Cylinder Quantity
2
2
2
2
Lift Range
5 ft (1.52 m)
6 ft (1.83 m)
4 ft (1.22 m)
5 ft (1.52 m)
Approximate Weight
967 lbs (439 kg)
1022 lbs (464 kg)
969 lbs (440 kg)
993 lbs (450 kg)
Height Adjustment Range
82-118 in
(208-300 cm)
94-130 in
(239-330 cm)
0 in (0 cm)
82-118 in
(208-300 cm)
Frame Length (Raised)
180 in (457 cm)
Frame Width (Raised)
131-9/16 in (334 cm)
Bunk Length*
150 in (381 cm)
Power Supply**
24V-DC Deep Cycle Battery
Construction
Welded 6061-T6 Aluminum
Pins
17-4PH Stainless Steel
Fasteners/Hardware
18-8 Stainless Steel
