Operations Manual, HPA3, Mini Compact Outdoor SSPA
208143 REV -
37
As the applet loads, the user will be prompted to enter a password. The default password is
paradise
(see
Figure 3-17
), but the user may assign a new password using the web M&C or
Paradise Datacom’s Universal M&C Software. See
Section
3.3
for details on using the
Universal M&C Software.
3.4.1 Navigating the Web M&C
The SSPA Monitor and Control is performed via following the links on the web page. These
links include Status and Faults, Communications Settings, General Settings and Fault
Settings.
•
Status and Faults Window
: A view of critical SSPA operational parameters. See
Figure 3-18
for descriptions of some of the functions available in this window.
Figure 3-17: Enter password (default is “paradise”)
Figure 3-18: Status and Faults window descriptions
Green indicates
no Faults;
Red indicates a
fault exists
Indicators for
Connection, Mute
and Online states
and Summary
Alarm.
Displays various
voltages, current
draw, Output
Power and BUC
reference source.
Displays
Attenuation and
Temperature
values.
Upper section is
common to all
windows; displays
Model Number,
Serial Number,
Firmware version,
and IP, MAC and
Network addresses
