10
•
Troubleshooting
PGI-128F Operating Guide
Responsibly dispose or recycle this unit through public collection points to avoid environmental harm.
Remove the doors before disposal to avoid child entrapment.
Unit makes too
much noise
•
The rattling noise may come from the flow
of the refrigerant, which is normal
•
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in
your unit.
•
Contraction and expansion of the inside
walls may cause popping and cracking noise
•
The unit is not level
•
Some noises are the natural result of
the cooling system
•
Ensure unit is level
Door doesn’t
close properly
•
The unit is tilted
•
The door was reversed and not properly
installed
•
The gasket is dirty or bent
•
The shelves, bins, or baskets are out of
position
•
Ensure unit is level
•
Check door for proper installation
•
Clean the gasket and replace if a bend
stops door from closing
•
Reposition interior shelves, bins, and
baskets as needed
Ice/frost forms
inside the unit
•
High humidity
•
Door is not kept closed
•
Door seal is faulty
•
Unit is overloaded
•
Frequent opening of door
•
Defrost as needed
•
Ensure door is fully closed
•
Replace faulty door seal
•
Remove excess bottles
•
Keep door closed in high humidity
