Paradox Marine Technical Support
1 (866) 929-4441
11
Base Thread Mounting
1.) Drill a 1 inch (26mm) hole to pass the connector and mounting thread through.
2.) Secure using M25 nut - Do not over tighten.
Figure 10
External Sensor Input
This optional input allows the user to monitor critical areas of their boat. Essentially,
whenever the system is armed and a circuit closes between the two contacts, an alarm
notification is sent out of the antenna. Normally open sensing application can be hooked
up in
“
parallel
”
to receive an alert whenever the closure happens. Typical sensing
applications include high water float switches and standard alarm door sensors (Figure
11).