Digiplex LED Keypads 15
will always beep upon closure.
Option
[4]
OFF = Chime on Zone Closure disabled (default)
Option
[4]
ON = Chime on Zone Closure enabled
4.8 B
EEP
ON
T
ROUBLE
Section 004: Options [1] to [4]
Potential troubles are sorted into groups. With these options
enabled, the keypad will emit an intermittent beep whenever a
trouble condition from the Trouble Groups occurs in the system.
The intermittent beep will remain activated until the user enters
the
Trouble Display
or if the trouble is resolved (see
Digiplex
Control Panel’s Reference & Installation Manual
for details
concerning Trouble Display). The intermittent beep will re-
initialize whenever the trouble re-occurs.
Option
[1]
OFF= Disabled: System Troubles [1] & Clock Loss [8] (default)
Option
[1]
ON = Enabled: System Troubles [1] & Clock Loss [8]
Option
[2]
OFF= Disabled: Communicator Troubles [2] (default)
Option
[2]
ON = Enabled: Communicator Troubles [2]
Option
[3]
OFF= Disabled: Module Troubles [3] & Network Troubles [4]
(default)
Option
[3]
ON = Enabled: Module Troubles [3] & Network Troubles [4]
Option
[4]
OFF= Disabled: Zone Troubles [5], [6], and [7] (default)
Option
[4]
ON = Enabled: Zone Troubles [5], [6], and [7]
Summary of Contents for Digiplex DGP-620
