Digiplex LCD Keypad’s 9
3.3.1 Normal Mode
When no actions are being performed on the keypad, the keypad will
remain in Normal Mode as shown in Figure 2-2 on page 9 and will
automatically display:
•The current status of the zones for every area the keypad is
assigned
•The
Alarm Memory Display
(see section 5.3) if any alarms have occurred
•The
Trouble Display
(see section 7.0) if any troubles are occurring
•The current state of the
Indicator Lights
Figure 2-2: Normal and Confidential Mode
3.3.2 Confidential Mode
The installer can program keypads not to display the status of your system
automatically by changing the LCD screen to Confidential Mode. In
Confidential Mode:
• The zones and status messages will NOT be displayed
• The
Indicator Lights
will not illuminate
• Depending on how your keypad was programmed by the installer,
you must either press a button or enter your
User Access Code
to
illuminate the
Indicator Lights
and activate
Normal Mode
.
Summary of Contents for Digiplex DGP-641
