EVOHD User Manual
25
9.1.5 Group 7: Zone Fault
A wireless device is no longer communicating with its receiver, or a connection or CleanMe
TM
trou-
ble is occurring with your smoke detectors.
9.1.6 Group 8: Clock Loss
The time and date have been reset to the default. This is the only trouble that we recommend that
you correct. Clock Loss [8] to Set will appear on the LCD screen after you press the [trbl] button or
the [
] key. Refer to
to set the time and date.
9.2 Event Record Display
The Event Record Display will record the user-initiated actions that occurred in your system as well as any
alarms or troubles (i.e. “Access Granted”). You will only be able to view the events that occurred in the area(s)
assigned to your user access code.
Only available on LCD keypads.
To view the Event Record:
1. Enter your
[
MASTER
CODE
]
.
2. Press the
[
7
]
button or scroll to view events.
3. If you have access to more than one area, select the area(s) you wish to view.
4. Use the
[
]
and
[
]
buttons to scroll between the events.
5. Press the
[
CLEAR
]
button to exit.
Once you have entered Event Record Display mode, you can change the order that the Event Record screens
appear by pressing the
[
7
]
button. If you already know the number of the event you want to view, press the
[
MEM
]
button after step 3 above, and then enter the event's number.
