HV8D - page 4
Bi-directional Locate Feature
Pressing and holding the LOC button for 3 seconds will initiate the Module Locate feature. When a Module Locate is
initiated, the module’s representation in the BabyWare software will flash and the module’s BUS, RX and TX LEDs will flash
at 1Hz to indicate that it is in locate mode. A module locate can also be initiated from the BabyWare software. From
BabyWare right-click the module’s representation and select Locate Physical. The module’s BUS, RX and TX LEDs will
flash. We highly recommend that after pressing locate and identifying the module, open the programming page and assign
the proper physical location label and the outputs’ labels and locations. After complete connection, use the space provided
on the module to indicate the outputs’ description.
Remote Firmware Upgrade
Work in progress...
The HV8D is firmware upgradeable remotely via the V32 controller’s Multibus at 57.6Kbps. Using BabyWare connect to the
V32 account using any of the connection methods (direct connect, IP static, or IP DNS). Right-click the desired module and
select Upgrade (???). A firmware upgrade for a single module or group of modules will take usually less than 10 minutes,
which keeps system downtime to a minimum.
Programming an HV8D Module
1) When BabyWare is communicating with the V32 controller and a HV8D module
is connected to the Multibus, it automatically appears in the Modules display
area. To view the Modules display area, click the
Modules
toggle button.
Alternatively, you may wish to add a module to BabyWare before the module is
physically connected to the system. Click the
Add Item
button.
2) To program a module that already appeared in the system, double-click the
module’s icon. The HV8D Programming window opens.
3) From the Type drop-down list, select Sprinkler, Light, or Customer for Relay
Mode, or select Shutter for Shutter Mode
.
Related Topics
•
If you have trouble locating the module in BabyWare, you can use the Bi-
directional Locate Feature (see page 4).
Figure 1: HV8D Programming
Patents
: One or more of the following US patents may apply: 7046142, 6215399, 6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069,
5077549 and RE39406 and other pending patents may apply. Canadian and international patents may also apply.
Trademarks
: Paradox Imperial, MAMA, BabyWare, the M logo, and the triangle logo are trademarks or registered trademarks of Paradox Security
Systems Ltd. or its affiliates in Canada, the United States and/or other countries.
Certification
: For the latest information on products approvals, such as UL and CE, please visit www.paradox.com.
Warranty
: For complete warranty information on this product please refer to the Limited Warranty Statement found on the website www.paradox.com/
terms. Your use of the Paradox product signifies your acceptance of all warranty terms and conditions.
© 2009 Paradox Security Systems Ltd. All rights reserved. Specifications may change without prior notice.
PARADOX.COM
Printed in Canada - 03/2009
IHV8-EI00
