IPR512-EQ03 09/2009
Page 5
PARADOX.COM
Step 11: Event Configuration
The Paradox reporting module will send a presence message (~100 bytes) at intervals defined by the Module Polling Time. If the
receiver does not receive at least one presence message from the module within the Receiver Supervision Time, the receiver can
report a communication loss to the Automation Software. For more information, refer to Step 12: Set Security Profile on page 6.
For more information on Receiver Events, refer to the IPR512 GPRS/IP Monitoring Receiver Operations Manual.
1) From the Main Menu, click
Event Configuration
.
2)
Highlight the
Account
event.
3)
Click the
Edit
button.
4)
Select the
Reported
check box to activate reporting of the selected event.
5)
Enter a report code (3 digits for CID format, 2 alphanumerics characters for SIA format). This report code will be reported in
CID or SIA format to the Automation Software whenever the selected event occurs. For account events, the receiver uses the
same report format used by the registered account. Receiver events are programmable.
6)
Click the blue
Save
link.
1
3
2
4
5
6
