Page 12
Arming
Chapter 3: Arming
When your system is armed, it can respond to any breach
in the protected zones by causing an alarm and sending a
report to your monitoring station.
To arm your system:
1) Press
[
MENU
]
>
[1]
ARM
/
DISARM
, then select an arming
type (see below).
2) Enter your
user code
.
3) If you have access to more than one area, select the
area(s) you wish to arm.
Arming Types
•
Arm:
This method is used for the everyday arming of
your system. All zones within the protected area must
be closed to arm the system.
•
Force Arm:
Force arming allows you to quickly arm
your system when zones are open. However, once the
open zone is closed, your system will then arm that
zone as well.
•
Stay Arm:
Stay arming will partially arm your system
to permit you to remain in your home or office by
arming the outer zones (perimeter) of the protected
area (i.e., doors and windows).
•
Instant Arm:
This feature is the same as Stay arming
except that there is no Entry Delay. Therefore, any
armed zone that is breached will immediately
generate an alarm.
Exit Delay Timer
When you arm your system, it will trigger the exit delay
timer to provide you with enough time to exit the
protected area before the system is armed.
Bypass Programming
You can bypass certain zones when you arm the
protected area(s). When a zone is bypassed, it will be
ignored the next time your system is armed. Once your
area is disarmed, the system will unbypass the zone. In
Summary of Contents for K656 Touch Sense
