14 Reference & Installation Manual
3.0.3 Step 3 - Key in Desired Section
Key in the desired 2-digit [
SECTION
] you wish to
program. The [
ENTER
] key will remain illuminated.
The [2
ND
] key will flash if the current section is
empty. Pressing the [2
ND
] key followed by the
[
ENTER
] key will clear the contents of the current
section.
3.0.4 Step 4 - Key in the required data
•
Sections [00]
[00]
[00]
[00] to [08]
[08]
[08]
[08]
Access Code Programming - Use any digits from
0 to 9 to enter the desired access code. When the
required data is entered, the keypad will emit a
confirmation
beep
and
the
Parakey
will
automatically save and exit the section. If you
make a mistake, pressing [
CLEAR
] when entering
data will erase the current entry. Return to step 3
or press [
CLEAR
] to exit Programming Mode.
•
Sections [09]
[09]
[09]
[09] to [16]
[16]
[16]
[16]
RF Programming - Press the [
ENTER
] key and
press button 1 twice on the remote control to
assign the remote control to the corresponding
user. The keypad will emit a confirmation beep
and the Parakey will save and exit the section.
Return to step 3 or press [
CLEAR
] to exit
Programming Mode.
Summary of Contents for PRK-315
