12 Installation and Operating Instructions
Example: When the reader and the keypad are
enabled, User 1 must present a valid card and
enter a valid code and then User 2 must present
a valid card and enter a valid code for Access
Granted.
Dual Access Granted with Dual Panic
Disarm
When
[2]
is programmed, two users are required
to obtain Access Granted (same as
Dual Access
Granted
) and two users are required to disarm a
Panic Alarm.
For example, a Panic Alarm is triggered, User 1
must present a valid card and enter a valid code
and then User 2 must present a valid card and
enter a valid code to disarm the alarm.
SECTION [004] DISPLAY ON CARD READ
The visual feedback when a card is presented to
the reader can be adjusted according to the
installation’s requirements. Option
[3]
by
default.
Enter Description
[0]
Display on Card Read disabled.
[1]
Red Status LED flashes.
[2]
Green Status LED flashes.
[3]
Red and green Status LEDs flash.
[4]
Face Light flashes.
[5]
Face Light and red Status LED flash.
[6]
Face Light and green Status LED flash.
[7]
Face Light and both Status LEDs flash.
Summary of Contents for R885S
