Magellan & Spectra SP • Programming Guide
51
Communication Report Codes
Use worksheet 47 to record your settings for communication report codes. Sections
[879]
and
[884]
apply to both GSM and network (GPRS/GSM) communications.
See
on page 42, for more communication features. In addition, refer to
Description of Sections [966] and [967]
on page 54, for clearing
and resetting codes.
Communication Restore Report Codes
Use worksheet 48 to record your settings for communication restore report codes. Section
[881]
applies to both GSM and network (GPRS/GSM) communications.
Software Options and Additional Timers
Use the following section to program software options and additional communication timers on your MG/SP control panel.
Additional Communication Timers
Use worksheet 49 to record your settings for sections
[901]
and
[902]
. For additional timers, see worksheets 38 and 40. Sections
[901]
and
[902]
are also applicable
when using a VDMP3 Plug-in Voice Dialer.
RF zone supervision lost
1 381
Loss of supervision - RF
US
Untype zone supervision
RF zone supervision restore
3 381
Supervision restore - RF
UR
Untyped zone restoral
RF module supervision lost
1 381
Loss of supervision - RF
US
Untyped zone supervision
RF module supervision restore
3 381
Loss of supervision - RF restore
UR
Untyped zone restoral
RF module tamper
1 145
Expansion module tamper
ES
Expansion device tamper
RF module tamper restore
3 145
Expansion module tamper restore
EJ
Expansion device restore
Paramedic alarm
1 1AA
Medical
MA
Medical alarm
Zone forced
1 57A
Zone forced
XW
Zone forced
Zone included
3 57A
Zone included
UU
Zone included
Remote low battery
1 338
Battery failure on module
YT
Module battery fail
Remote low battery restore
3 338
Battery failure on module restore
YR
Module battery fail restore
Failed to arm
1 454
Failed to close
CI
Failed to close
Worksheet 47: Communication Report Codes
Section
Data
Description
Section
Data
Description
Section
Data
Description
[879]
___/___
PCS series RF jam
[880]
___/___
-
[884]
___/___
GSM lost communication
with panel
___/___
PCS series no service
___/___
IP Module no service
___/___
-
___/___
PCS series module
supervision lost
___/___
IP Module supervision lost
___/___
-
___/___
Receiver fail to
communicate (GPRS)
___/___
IP receiver fail to
communicate
___/___
-
Worksheet 48: Communication Restore Report Codes
Section
Data
Description
Section
Data
Description
[881]
___/___
PCS series RF jam
[882]
___/___
-
___/___
PCS series no service
___/___
IP Module no service
___/___
PCS series module supervision lost
___/___
IP Module supervision lost
___/___
Receiver fail to communicate (GPRS)
___/___
IP receiver fail to communicate
Table 46: Description of section [900] (BabyWare options)
Section
Option
Description
OFF
ON
[900]
1
Call back
Disabled
Enabled
2
Automatic event buffer transmission
Disabled
Enabled
= Default
Worksheet 49: Additional Communication Timers
Section
Data
Description
Default
[901]
___/___/___
000 to 255 rings
Number of rings
008
[902]
___/___/___
000 to 255 secs. (max 127)
Answering machine override delay
030
Table 45: List of automatic report codes (Continued)
System Event Default Contact ID Report Code
Default SIA Report Code
Summary of Contents for SP6000
Page 71: ......
