1813 VoIP Gateway User’s Guide
Chapter 7 Software Upgrade via FTP
Follow the steps below to upgrade the firmware version of the Gateway via FTP.
The procedures below use LAN port IP address 192.168.1.101 for illustration.
STEP 1:
Connect the Gateway to a PC using the LAN cable. Set the PC to the same subnet as
the Gateway (192.168.1.101).
STEP 2:
Start an FTP program on the PC.
STEP 3:
Start DOS and enter the menu where the new firmware is installed:
Example: C:\Upgrade
STEP 4:
Enter the command: ftp 192.168.1.101 (Gateway’s IP address)
STEP 5:
At the USER prompt type
root
(small case)
STEP 6:
At the Password prompt type
1234
STEP 7:
After you see the message User Logged in, type:
Bin
STEP 8:
After you see the message Type set to I, type:
ha
STEP 9:
After you see the message Hash mark printing, type:
put <filename.bin> app
Example: put firmware app
36
