Paradyne 3170, Quick Reference

 6

Table 2.   Port Configuration Options (2 of 2)

Option

Comments/Description

Factory

Disab

All Ones:

DTR

All ones sent to network (DTE) E1 when DTR or RTS

All Ones:

RTS

All ones sent to network (DTE) E1 when DTR or RTS
interrupted.

Both

Rcv RAI:
(A ti

R

i

d

None

Data port remains enabled, or is disabled, on receiving RAI

(Action on Received
Remote Alarm Indication)

Halt

Data  ort remains enabled, or is disabled, on receiving RAI
on the network interface.

Tx Clock:

Int

Selects whether the transmitted data clock is internal

Tx Clock:

Ext

Selects whether the transmitted data clock is internal
(TXC) or external (XTXC).

InvertTxC:

Enab

S l

t

h

i

i

f th t

it l

k (TXC)

InvertTxC:
(Invert Tx Clock)

Disab

Selects phase inversion of the transmit clock (TXC).

InvertData:

Enab

Allows the data on the port to be inverted

InvertData:

Disab

Allows the data on the port to be inverted.

EDL:

Enab

Specifies whether the Embedded Data Link is enabled

EDL:

Disab

Specifies whether the Embedded Data Link is enabled.

10E–4

10E–5

Err Rate:

10E–6

Selects the error rate threshold for Excessive Error Rate
Al

Err Rate:
(Excessive Error Rate)

10E–7

Alarm.

10E–8

10E–9

Disab

Near end:

Maint

Specifies whether the device will maintain near-end

Near-end:

Send

S ecifies whether the device will maintain near-end
performance statistics.

Both

Far end:

Disab

Specifies whether the device will maintain far-end

Far-end:

Maint

S ecifies whether the device will maintain far-end
performance statistics.

Mgmt Link:

Enab

Specifies whether the EDL Management Link is enabled

Mgmt Link:

Disab

Specifies whether the EDL Management Link is enabled.