7
Table 3. Network Interface Configuration Options
Option
Factory
Comments/Description
NET Frame:
CRC4
Selects framing format
NET Frame:
noCRC
Selects framing format.
Mgmt Link:
Disab
Specifies whether the FDL’s Management Link is enabled
Mgmt Link:
SNMP
Specifies whether the FDL’s Management Link is enabled.
Circuit Ident:
Edit
Specifies the transmission vendor’s circuit identifier
Circuit Ident:
Clear
Specifies the transmission vendor’s circuit identifier.
Table 4. DTE Channel Configuration Options
Option
Factory
Comments/Description
DTE Channels:
TS16
Selects TS16 for signaling or
assigns DS0 channels on the DTE
DTE Channels:
Assign
assigns DS0 channels on the DTE
Drop/Insert interface to DS0
channels on the network interface.
TS16:
Data
Specifies whether time slot 16 is
reserved for signaling information
TS16:
Rsvd
reserved for signaling information
or available for data.
Line 1 Displays:
Line 2 Displays:
Meaning
Comments/Description
—
Unassigned
N1 N2 N3
N24
D1, D2 ... D24
Channel assigned
to this DTE channel
Function key under the channel
(N1, N2, etc.) selects the DTE
h
l t
i
(D1 th
h
N1 N2 N3 ...... N24:
Prt1
Prt2
Prt3
Prt4
Channel assigned
to port 1, 2, 3, or 4
(
)
channel to assign (D1 through
D24, or –).
