3. Using the Web Interface
6382-A2-GB20-00
April 2005
3-37
Table 3-2
defines the different severity levels.
To forward logging information:
Procedure
1. Click on Tools and select Remote Log.
2. Select a Log Level from the drop-down list.
3. Type the IP address of the remote logging destination and click on Add.
4. Click on Apply. To make the change permanent, click on Tools (at the top of
the page) and select System Commands. At the System Commands page,
click on Save All.
Table 3-2.
Severity Levels
Severity Level
Description
Panic
System panic or other condition that causes the router to stop
functioning.
Alert
Conditions that require immediate correction, such as a corrupted
system database.
Citical
Potentially critical conditions, such as hard drive errors.
Error
Error conditions that generally have less serious consequences
than errors in the panic, alert, and critical levels.
Warning
Conditions that warrant monitoring.
Notice
Conditions that are not errors but might warrant special handling.
Info
Events or non-error conditions of interest.
Debug
Software debugging messages. Specify this level only if so directed
by your technical support representative.
