3. Configuration Using the Web Interface
8900-A2-GB20-50
August 2005
3-13
3. Click on Apply.
End VCI
Enter the last VCI for this side of the cross-connection.
Segment End Point
Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This field
determines if the port card will function as an endpoint for
ATM OAM loopbacks. If False, the port card will loop back a
cell only if its location ID matches the preconfigured
location ID. (See
Configuring ATM Ports
on page 3-16.) All
other loopback cells are passed to the next segment.
Port B
Slot
Select from the drop-down list the slot where the card
associated with this port resides.
Port
Select the user port for the cross-connection.
VPI
Enter the VPI for the user side of the cross-connection.
Start VCI
Enter the first VCI for the user side of the cross-connection.
End VCI
Enter the last VCI for the user side of the cross-connection.
Segment End Point
Select True or False from the drop-down list to signify
whether this connection is the segment endpoint. This field
determines if the port card will function as an endpoint for
ATM OAM loopbacks. If False, the port card will loop back a
cell only if its location ID matches the preconfigured
location ID. (See
Configuring ATM Ports
on page 3-16.) All
other loopback cells are passed to the next segment.
Profiles
Port B to Port A Profile
Select a profile for upstream traffic.
Port A to Port B Profile
Select a profile for downstream traffic.
Field
Description
