background image

 1

9109 Sync Data Application Module (APM)
Installation Instructions

Document Number 9109-A2-GN10-50

August 2000

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com
Select 

Library

Technical Manuals 

FrameSaver Frame Relay Devices or

NextEDGE Multiservices Access System.

Select the appropriate document:

9161-A2-GB20
Model 916x/926x T1 Access Mux User’s Guide

9161-A2-GH30
Model 916x/926x T1 Access Mux Technical Reference

9191-A2-GB20
FrameSaver SLV Multiservices Access Unit, Models 9191, 9192, and 9195,  User’s
Guide

To order a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Before You Begin

Make sure you have:

The housing, and any associated hardware, already installed

The housing installation instructions

A T1 NAM already installed in Slot 01 and connected to the network

Applicable cables

A small Phillips screwdriver (#1 or #2) to install the APM

A small, flat-blade screwdriver to install the I/O card and cable connections

Summary of Contents for 9109









Reviews: