12
User Interface (continued)
Configuration Option
Settings
Default in
[Bold]
External Device (COM Port)
External Device Commands
[Disable], AT, Other
Dial-In Access
6
Enable, [Disable]
Connect Prefix
7
ASCII text entry, Clear
Connect Indication String
7
ASCII text entry, Clear
Escape Sequence
7
ASCII text entry, Clear
Escape Sequence Delay (Sec)
7
[None], 0.2, 0.4, 0.6, 0.8, 1.0
Disconnect String
7
ASCII text entry, Clear
Telnet/FTP Sessions
Telnet Session
Enable, [Disable]
Telnet Login Required
Enable, [Disable]
Session Access Level
[Level-1], Level-2, Level-3
Inactivity Timeout
Enable, [Disable]
Disconnect Time (Minutes)
1 – 60
[5]
FTP Session
Enable, [Disable]
FTP Login Required
Enable, [Disable]
6
Only shown when External Device Commands is set to Other or AT.
7
Only shown when External Device Commands is set to Other.
Alarm
Configuration Option
Settings
Default in
[Bold]
ASCII Alarm Messages
Com Port, [Disable]
Alarm & Trap Dial Out
Enable, [Disable]
Trap Disconnect
[Enable], Disable
Call Retry
Enable, [Disable]
Dial-Out Delay Time (Min)
1 – 10
[5]
Alternate Dial-Out Directory
[None], 1 – 5
System Alarm Relay
Enable, [Disable]
