Troubleshooting and Maintenance
5-7
9161-A2-GH30-20
September 1997
6. Follow this menu selection sequence, pressing Return after each selection:
Configuration Edit/Display
→
Alarm
The Alarm Options screen appears.
7. Select and set the following configuration options, as appropriate.
To . . .
Set the configuration option . . .
Automatically initiate a call (dial out)
Alarm & Trap Dial-Out to Enable.
Retry the call if the call cannot be
completed
Call Retry to Enable
Dial-Out Delay Time to the desired
number of minutes
Alternate Dial-Out Directory to the
desired directory
Specify whether to disconnect
immediately after dialing out traps, or to
allow a manual disconnect to occur. (A
connection remains until manually
disconnected.)
Trap Disconnect to Enable.
8. Press Ctrl-a to switch to the screen function key area.
9. To save changes, select Save and press Return.
10. Select the configuration area where you want to save the changes to and
press Return.
When Save is complete, Command Complete appears at the bottom of the
screen.
Troubleshooting
The T1 access unit is designed to provide you with many years of trouble-free
service. If a communication problem occurs, however, refer to the appropriate
table in the following sections for possible solutions. The T1 access unit has
features that allow you to troubleshoot your network.
