Security
6-8
9161-A2-GH30-20
September 1997
Refer to
Setting Up for SNMP Management
in Chapter 4 for more information
about SNMP configuration options.
Assigning SNMP Community Names and Access Levels
The General SNMP Options screen provides the configuration options that allow
the T1 access unit to be managed by an SNMP manager supporting the SNMP
protocol. Use this screen to:
H
Assign the SNMP community names that are allowed to access the unit’s
Management Information Base (MIB).
H
Specify the type of access allowed for each SNMP community name.
NOTE:
Community names are case-sensitive.
"
Procedure
To assign SNMP community names and access levels:
1. Follow this menu selection sequence:
Main Menu
→
Configuration
2. Select the desired configuration area and press Return.
Load Configuration From
→
[Current Configuration/
Customer Configuration 1/Customer Configuration 2]
3. Follow this menu selection sequence, pressing Return after each selection:
Configuration Edit/Display
→
Management and
Communication
→
General SNMP Management
The General SNMP Management Options screen appears.
4. Select and set the following configuration options, as appropriate.
To . . .
Set the configuration option . . .
Enable SNMP management for the
access unit
SNMP Management to Enable.
Assign SNMP community names
Community Name 1 and Community
Name 2 to a community name text up to
255 characters in length.
Assign the type of access allowed for
the SNMP community names
Name 1 Access and Name 2 Access to
Read or Read/Write.
