MIB Descriptions
B-13
9161-A2-GH30-20
September 1997
Extension to Interface Table (ifXTable)
This extension contains additional objects for the interface table. The T1 access
unit supports only the following objects.
Object
Description
Setting/Contents
ifName
(ifXEntry 1)
Provides name of the
interface.
Interface test strings:
Network T1
DSX-1 T1
COM
Voice and Sync Ports – S
ssPp
1
FDL
DDL
EDLs – S
ssPp
2
ifLinkUpDown-
TrapEnable
(ifXEntry 14)
Indicates whether the
linkUp and linkDown should
be generated.
Does not support COM port, Voice ports,
FDL, DDL, or EDLs.
NOTES: – SNMP Traps must be
enabled (see
SNMP
Trap configuration
options
).
– Setting ifLinkUpDown for
any data port affects all
data ports (there is only
one option for all data
ports).
ifHighSpeed
(ifXEntry 15)
Automatically inserts the
ifSpeed setting for the
interface.
Interfaces supported: T1, DSX-1, COM
port, data ports. Read only and set
based on the value of the ifSpeed for the
interface:
IfSpeed from 0 to 499,999 bps = 0
IfSpeed from 500,000 bps to
1,499,999 = 1
ifSpeed from 1,500,000 bps to
1,536,000 = 2
ifConnector-
Present
(ifXEntry 17)
Indicates whether there is a
physical connector for the
interface.
true(1) – Always have this value for
the network T1, DSX-1, COM, Sync
Data ports, and Voice ports.
false(2) – Always have this value for
FDL, DDL, and EDLs.
1
Voice and Data ports where
ss is the slot number p is the port number.
2
Where
ss is the slot number p is the port number of the data port of this EDL.
