![background image](http://html2.mh-extra.com/html/paradyne/comsphere-6800-series/comsphere-6800-series_multiplexer-management-and-configuration-manual_3634172134.webp)
COMSPHERE 6800 Series Nework Management System
2-34
August 1994
6800-A2-GB21-10
4. TYPE: 4 (Group Definition)
PRESS: Enter
The system displays the following prompt:
(Node xxx) enter dial sequence >
5. TYPE: The channel group number you want defined
PRESS: Enter
The Group Type menu appears.
6. TYPE: 5
PRESS: Enter
The Datagram Group Definition parameters menu appears. The parameters on your screen
should match those shown below.
PARAMETER
SETTING
1) Group Members
None
2) Security Password
Inactive
3) Incoming Restriction
None
D) Delete
S) Save
7. To select the Group Members parameter,
TYPE: 1
PRESS: Enter
8. To add the Channel Group Number to the Local Group Definition parameters menu,
TYPE: 1
PRESS: Enter
9. To save the parameters you have entered,
TYPE: S
PRESS: Enter
The system returns to the Configuration menu.
This completes the 719 NETWORKER setup procedure for one terminal or PC. To
configure the 719 to interface with NMS, go to Creating the Control Mode Group.